Nagoya Showroom
This showroom allows you to experience NEXTY Electronics’ solutions for manufacturing DX in person.
In May 2023, we opened a new showroom in the Fushimi district of Nagoya, providing a venue to experience our solutions in person.The solutions have been developed together with manufacturers and partners. Visitors are able to experience first-hand the various demonstrations of realizing DX in the manufacturing industry.
The showroom also serves as a platform for demonstrating solutions to the various problems faced by customers who visit it.
We invite you to come to see a glimpse into the future of the manufacturing industry.
Solutions on Display
Easy Setup for Collision-Free Robot Motion Planning
Watch how three closely positioned robots can operate without colliding, using a motion plan that is easy to configure. This is highly effective for variable-mix, variable-volume production lines.
No Need for Robot Re-Teaching When Task Order Changes
See how multiple nearby robots can continue operating even when task sequences change—without requiring re-teaching from scratch.
3D Simulator for Production and Logistics Processes
Experience a 3D simulation tool that enables optimal process and workforce validation for factory design, as well as visualization and optimization of logistics including AGVs and AMRs.
Indoor Positioning Demo in 3D Coordinate Space
Try a demo where a handheld device is tracked with centimeter-level accuracy in 3D space. Experience high-precision indoor positioning.
Virtual Fence Experience
See how a warning system triggers sound or vibration alerts when entering a designated hazardous zone. Experience virtual fence setup and intrusion alerts.
AMR Navigation with Obstacle Avoidance
Watch AGVs/AMRs navigate toward a target point while avoiding obstacles, based on coordinates obtained from ZEROKEY devices.
Human Error Prevention in Manual Tasks
Observe how the system detects the movement of an operator’s arm and screw-fastening tool to prevent procedural mistakes.
Experience assembly work guided by digital work instructions.
Error-Proofing for Screw Fastening Tasks
Observe how screw fastening at 5 cm intervals is performed in the correct sequence, with clinch values accurately stored in the cloud. This solution is highly effective for preventing human errors and managing data.
AI-Based Predictive Maintenance Sensor for Factory Motors
Experience a demo of AI-driven predictive maintenance for three-phase motors, essential for utility equipment. Easy to install and ready for measurement within 15 minutes after setup.
We operate this showroom as a “place of support” to help solve each visitor’s unique challenges.
A Place to Solve Your Challenges
Share your challenges with us, and we will propose solutions tailored to your needs.
Private Workshops and Webinars
We plan and host private workshops and webinars focused on solving manufacturing DX challenges across company boundaries.
Private Workshop & Webinar Schedule
Private workshops and webinars are currently being prepared—stay tuned!
Examples of Past Private Workshops
| Date | Company | Theme |
|---|---|---|
| 2024/8/7 | Company A | Challenges and solutions for smooth introduction of innovative technologies from new production line development to mass production launch |
| 2024/7/31 | Company B | Identifying solutions for work handling and pick-and-place challenges faced by manufacturing customers, leveraging technologies and assets owned by Company B and NEXTY Electronics |
Partner Information (Including Authorized Distributors)
We continuously update product demos and partner information to address manufacturing DX challenges.
We also welcome collaboration inquiries.
Partner Companies (Including Authorized Distributors)
| Field | Partner Information | Link |
|---|---|---|
| 3D Simulation | GENETEC CORPORATION FlexSim is a simulator that enables visualization and optimization of entire factories and warehouses. | |
| SCADA (Traceability / WCS) | NISSIN ProSOL CO., LTD. Proposes automation and labor-saving solutions centered on proprietary SCADA systems. | |
| Industrial Robot Motion Planning Software | Realtime Robotics Automated motion planning solutions for multi-robot cells. | |
| Indoor Positioning | ZEROKEY positioning system using ultrasound, accurate to within a few millimeters. | |
| Manufacturing Support Application Platform | TULIP A low-code platform that enables DX in manufacturing environments. | |
| Predictive Maintenance | Analog Devices AI-Powered Smart Motor System for Motor Diagnostics | |
| Predictive Maintenance | Animo Limited Inspection and maintenance support using acoustic/vibration diagnostics. Visualizes and quantifies equipment conditions for accurate diagnosis. |
Access
Round Terrace Fushimi 8F, 1-17-26 Nishiki, Naka-ku, Nagoya, Aichi Prefecture
Approx. 9 minutes by taxi from Nagoya Station
5-minute walk from Exit 8 of Fushimi Station (Higashiyama Line / Tsurumai Line)
