NXP PMIC OTP Programming Service

We provide one-stop services for baking, marking, OTP programming, and taping. OTP programming requires dedicated equipment, and only NXP-authorized distributors can perform this service.
NEXTY Electronics is one of the few domestic distributors with NXP authorization and automated programming equipment, serving customer needs from small lots to mass production.

• NXP-Authorized Distributor for PMIC OTP Programming
• FS24 Series Programming Available from August 2025
• Series Expansion Planned Sequentially

One-Stop Service Items

NeefA (Network expert for Automotive)

NeefA is a test house operated by NEXTY Electronics that provides automotive Ethernet testing and consulting services. We incorporate testing expertise from C&S group GmbH, with over 20 years of experience in the automotive communications industry, to provide European-standard testing services.

OPEN Alliance ECUテスト

OPEN Alliance TC8 is a test specialized for automotive Ethernet evaluation of ECUs. Various test specifications are issued by OPEN Alliance, a standardization body for automotive Ethernet, and we provide the TC8 test service most requested by customers.
We also plan to support upcoming 10BASE-T1S ECU testing.

Other Services

OEM-Specific ECU Test

In addition to OPEN Alliance standardized tests, we provide some ECU testing services for OEM-specific specifications.

C&S Test/Consulting

We offer network consulting that identifies potential issues at the network architecture level and proposes solutions aligned with customer requirements, as well as European OEM-specific ECU testing services.

[Partner Introduction]IAR: Optimal Software Development Environment for S32K Series

PointVarious Setup Guides Available Free

Debug possible in as little as 10 minutes after tool installation.

https://www.iar.com/ja/campaign/guide_for_nxp

*URL is subject to change.
If the link is broken, please contact IAR for individual support.

PointFlexible Licensing Models for Your Development Setup

We can propose license model combinations suited to your needs, including functional safety versions, permanent/subscription licenses, and capacity licenses for CI/CD environments.

NXP Automotive MCU S32K311 Original Evaluation Board

Key Points of NXP Automotive MCU Original Board

• Easily start new development with NXP.
• Equipped with both CAN-FD and LIN transceivers. This single board enables evaluation of CAN-FD 5Mbps and LIN communication.
• Compatible with NXP's free development environment S32 Design Studio for S32.
  Sample code for CAN/LIN/ADC/Timer/GPIO is provided.
  *This evaluation board is not for sale.

<Items to be prepared by customer>

• DC 12V Power Supply
• Hardware Debugger (SEGGER J-LINK or P&E Micro USB Multilink Universal)

<NXP Official Links>　
S32 Design Studio for S32 Platform

[S32K311 Evaluation Board] Block Diagram

[S32K311 Evaluation Board] Development Environment

[Partner Introduction]Green Hills Software

Leading Independent Software Provider for Embedded Systems

• 42 Years of Leadership in the Embedded Software Industry
• Global Presence in America, Europe, Asia and More

Technology Innovator

• Safe & Secure High-Performance Operating System
• Safe & Secure Virtualization Services
• Best-of-Class Integrated Development Environment
• Secure Device Lifecycle Management

Diverse Markets

• Automotive, Avionics, Consumer, Industrial, Medical, Military, Networking, Storage
• CMMI Level 3 Certified Development Team
• ASPIC Development Process

Green Hills Software Product Lineup

Product	SoC	Features	Development Tools
µ-visor	Infineon, Renesas, NXP, ST	ASIL-D Thin Type-1 Hypervisor	For all product development: ・Multi ・Probe V4 can be used
µ-velOSity	32Bit Arm-Cortex M, R, etc. 32Bit RISC-V No MMU function	Compact, fast, and easy-to-use RTOS ideal for cost and resource constrained devices
INTEGRITY	Arm-Cortex A MMU required 64Bit RISC-V PMP required	INTEGRITY uses message notification design with full memory protection
Multivisor	Arm-Cortex A MMU required	Reliable and flexible embedded virtualization solution
Multi	・Supports INTEGRITY, µ-visor, µ-velOSity, Linux, AUTOSAR, and other OSes ・Multi-core debugger, high-speed simulator, performance analysis, bug detection tools ・C/C++/Ada compiler and runtime libraries included ・ISO 26262, IEC 61508, EN50128 certified
Probe V4	・Hardware debugger and trace ・Multi-user, high-speed, JTAG & trace board setup and debugging

u-blox: Wi-Fi® + Bluetooth® Module Solution

NXP's wireless solutions are built on decades of expertise in Wi-Fi, Bluetooth®, multi-protocol silicon, software, and system design, including tri-radio architecture 802.15.4. NXP offers a wide range of power-efficient and cost-optimized Wi-Fi, Bluetooth, and 802.15.4 transceivers, deploying products at scale across multiple markets with advanced Wi-Fi features including Wi-Fi 4, Wi-Fi 5, Wi-Fi 6, and multi-radio capabilities.

NXP has partnerships with many wireless module manufacturers, and we handle u-blox AG.

Module Operation Types

i.MX 93 Board with u-blox Chip

FRDM i.MX 93 Development Board

The FRDM i.MX 93 development board is a low-cost, compact development board featuring the i.MX 93 application processor.
It features an onboard IW612 module with NXP's tri-radio solution supporting Wi-Fi 6 + Bluetooth 5.4 + 802.15.4, ideal for developing the latest industrial & IoT applications.
This development board includes HDMI display interface, LPDDR4/LPDDR4X, eMMC storage, enabling fast boot time, PMIC, and expansion capabilities. The FRDM i.MX 93 board also supports GoPoint for i.MX application processors, allowing you to leverage comprehensive demos for various use cases to accelerate time-to-market.

[Partner Introduction]Hitachi Solutions Technology: Remake Service

For customers considering replacement from older products, NEXTY Electronics proposes NXP products with good availability. For hardware development and software migration support, we introduce our partner 'Hitachi Solutions Technology, Ltd.

e-NEXTY: Engineer Design Support Site

1. Similar Product Search Function

Search for similar products from NEXTY Electronics' database of 4 million components.

2. RF Level Diagram Creation

Features noise, gain, and characteristic comparison functions for RF components.

3. Block Diagram Creation Function

Block diagram features keep evolving! Achieve high-quality artwork.

4. Events & Latest Technology/Product Information

NEXTY Electronics hosts online seminars and web exhibitions on various electronics themes we have curated.