Introducing sensors | NEXTY Electronics, an electronic components and semiconductor trading company

Waterproof and dustproof
camera
LiDAR

Waterproof and dustproof

AI for agricultural and construction machinery is used in harsh environments such as fields and construction sites, where not only are there vibrations and shocks, but also water, oil, dust, and dirt.
Here we introduce sensors with excellent environmental resistance, waterproof and dustproof specifications (IP67 or higher).

First characteristic		Second characteristic
1	Protects against solid objects with a diameter of 50 mm or more	1	Vertically falling water droplets do not get in
2	Protects against solid objects with a diameter of 12.5 mm or more	2	Even if tilted within 15 degrees, vertically falling water droplets will not get in.
3	Protects against solid objects with a diameter of 2.5 mm or more	3	The equipment is not affected by water sprayed at angles up to 60 degrees on either side of the vertical
4	Protects against solid objects with a diameter of 1.0 mm or more	4	The device is not affected by water splashes from any direction
5	Dust has entered the device, but the operation of the electronic equipment is not affected.	5	No impact on water jets from any direction
6	No dust intrusion	6	The equipment is not affected by powerful jets of water.
		7	No damage to the device even when temporarily submerged in water

Table 1: Waterproof and dustproof grade (e.g. IP67)

camera

We would like to introduce the TireIV C1, a camera designed for outdoor use.
The SONY ISX021 is mounted in a rugged IP69K housing and connected to the ECU via GMSL2.
The sensors introduced here are available for purchase from us.

■Click here for details

TireIV Automotive Camera (Edge.Auto site)

Product name	C1
Image Sensor	SONY ISX021
ISP	On-chip (sensor built-in)
Serializer	MAX9295A
resolution	1920 x 1280 (2.5M)
Shutter Type	rolling
Dynamic Range (dB)	120 (max)
FRAMES rate (fps)	30 (max)
LED Flicker Reduction	can be
Lens Distortion Correction	Yes (ISP function)
Image Output Format	YUV422
Power consumption (W)	1.7 (30fps, DC9-12V input)
Output Interface	GMSL2 (up to 6Gbps, PoC)
Synchronization feature	HW/SW triggering over GMSL2
Waterproof and dustproof grade	IP69K
Operating temperature (℃)	-40 to 85

Table 2: Camera specifications

LiDAR

We would like to introduce the LIVOX MID-360, a LiDAR capable of 360° detection.
This sensor offers excellent cost performance and is waterproof and dustproof to IP67 standards.
The sensors introduced here are available for purchase from us.

■Click here for details

LIVOX MID-360 (LIVOX website)

Product name	MID-360
Laser wavelength	905nm
safety grade	Class 1 (IEC60825 1:2014)
Detection range	40m@Reflectance 10%
Detection range	70m@Reflectance 80%
FOV	Horizontal: 360°
FOV	Vertical: -7~52°
Distance accuracy (1σ)	2cm@10m
Angular accuracy (1σ)	< 0.15°
Number of data	200,000 points/s
FRAMES rate	10 Hz
Power consumption (W)	6.5 (average)
Output Interface	100BASE-TX Ethernet
Synchronization feature	IEEE 1588-2008 (PTPv2), GPS
Waterproof and dustproof grade	IP67
Operating temperature (℃)	-20 to 55